Online assistance for electrical trade people Login  |  Register  |   Forgot Password
Assistance for electrical trade people
 

 

 

 


Click here to send Ron a pdf document for publication on this Topic

Documents must be less than 200k in pdf format

Posted By Topic: DALI control system help

paulhiggs
Jan 23 2018 20:05

Hello, I hope there is some one out there that can help me. I'm on a job that requires a DALI control system for the lights. I don't have any experience with this control system. So can any one point me to a resource (web page, youtube) that gives instructions on how to set it up. I have been told you need 5 wires going to each light to start with. I guess 2 wires will be used for control. Please leave a comment if you have any experience, thanks.
   

SparkyJoe
Jan 24 2018 18:02

Run your L/N/E TPS from the controller [Mount in enclosure under DB) and a second tps (again from the controller) for the signal cable. Light switches wired in dali specced CAT cable in a radial.

Get someone like lighthaus to program it.

http://lighthauslimited.co.nz/